EasyManua.ls Logo

MIR MiR100 Hook - Warning Label

MIR MiR100 Hook
194 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Safety
MiR100 Hook User Guide (en) 10/2020 - v.3.0 ©Copyright 2016-2020: Mobile Industrial Robots A/S. 30
Making changes to the SICK configuration
Driving MiR100 Hook on cross slopes
Exceeding the total payload
Positioning or fastening loads incorrectly according to the specifications
Using Emergency stop buttons for anything other than emergency stops
Using MiR100 Hook to tow carts not fulfilling the technical specifications
Using MiR100 Hook in medical and life critical applications
Operating MiR100 Hook outside the permissible operating parameters and environmental
specifications
Using MiR100 Hook in potentially explosive environments
Using MiR100 Hook outdoors
Using MiR100 Hook in hygiene zones
NOTICE
If the robot is misused, the warranty of the robot becomes void. Only use the
robot as described in Intended use on page28.
3.6 Warning label
MiR100 Hook is supplied with a warning label that specifies that it is strictly prohibited to
ride on the robot.
The label must be placed on the robot or top module so that it is clearly visible.
Figure 3.1. The warning label must be placed on the robot or top module.

Table of Contents

Related product manuals