EasyManua.ls Logo

MIR MiR100 Hook - Battery

MIR MiR100 Hook
194 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13. Packing for transportation
MiR100 Hook User Guide (en) 10/2020 - v.3.0 ©Copyright 2016-2020: Mobile Industrial Robots A/S. 183
Shut down the robot—see Shutting down the robot on page53.
Disconnect the battery—see Disconnecting the battery on page56.
Unmount MiR Hook 100—see Unmounting the top module on page1.
To pack the robot, repeat the steps in Unpacking MiR100 Hook on page34 in the reverse
order.
NOTICE
Pack and transport the robot in an upright position. Packing and transporting
the robot in any other position voids the warranty.
13.3 Battery
The lithium-ion battery is subject to transport regulations. Make sure that you follow the
safety precautions in this section and the instructions in Packing for transportation on the
previous page. Different regulations apply depending on the mode of transportation: land,
sea, or air.
Contact your distributor for more information.
CAUTION
Lithium-ion batteries are subject to special transportation regulations
according to United Nations Regulation of Dangerous Goods, UN 3171. Special
transport documentation is required to comply with these regulations. This
may influence both transport time and costs.

Table of Contents

Related product manuals