MIR MiR100 Hook - Unpacking Mir100 Hook

4. Getting started
MiR100 Hook User Guide (en) 10/2020 - v.3.0 ©Copyright 2016-2020: Mobile Industrial Robots A/S. 34
• The USB flash drive in the document folder has the following content:
• This user guide
• MiR100 Hook Quick Start
• MiR Network and WiFi Guide
• MiR Robot Reference Guide
• MiR Robot REST API Reference
• Getting the robot online
• The MiR Hook 100 top module
4.2 Unpacking MiR100 Hook
This section describes how to unpack the robot.
Keep the original packaging for future transportation of MiR100 Hook.
Follow these steps to unpack the robot:
1. Place the box with the robot so that there is three meters of free space at the front or the
back of the box. This is necessary as the robot drives out of the box on a ramp.
2. Cut the protective straps surrounding the box.
3. Remove the lid from the box.
4. Take the folder with the printed documents and the USB flash drive out of the box.