4. Getting started
MiR100 Hook User Guide (en) 10/2020 - v.3.0 ©Copyright 2016-2020: Mobile Industrial Robots A/S. 35
5. Remove the walls of the box and the protective foam blocks.
6. Place the lid of the box so that you can use it as a ramp at the robot's front or rear end.
Align the lid so that it is flush with the base of the box.
Unpacking MiR Hook 100 top module
Follow these steps to unpack MiR Hook 100:
1. Remove the pallet lid.
2. Remove the shield and cut the cord that holds the hook attached to the pallet.
To Next Page
Loading...
