300
6 COMMUNICATION FUNCTIONS
6.2 Security Function
Writing/deleting software security keys to and from the Motion CPU
By writing a security key to the Motion CPU, the execution of programs can be prohibited for Motion CPUs in which a different
key from that for the program file is written. A single security key can be written to multiple Motion CPUs. If writing a security
key, create a key at the "Security key management" screen beforehand, and then connect to the Motion CPU. (Security keys
can only be written or deleted when the Motion CPU is in the STOP status.) Refer to following for details on operation.
Help of MT Developer2
[Project] [Security] [Security Key Setting]
■Write procedure
1. Select the security key to be written to the Motion CPU from "Name".
2. Click the [Write] button from the [CPU] tab.
■Deletion procedure
1. Click the [Delete] button from the [CPU] tab.
To Next Page
Loading...
