293
APPENDICES
APPEN
DIX
Appendix 1 Parameter Setting
Appendix 1.2 PLC Parameter
(6) Program Setting
File names and execution types (execution conditions) are set for each program when more than one programs
are written to the CPU module.
Item
Parameter
No.
Description Setting range Default Reference
Program setting
7000
H
Set the execution order and type of the
program. For a fixed scan execution
type program, set the fixed scan interval
(execution interval).
•Wait
• Scan
• Initial
• Fixed Scan
⎯
Page 58,
Section 2.8
File Usability Setting Set the use of local device files.
• Set (use the devices
according to the PLC File
settings)
• Not used
⎯
To Next Page
Loading...
Need help?
General
