294
(7) SFC Setting
Parameters required for SFC programs are set.
Item
Parameter
No.
Description Setting range Default Reference
SFC Program Start
Mode
8002
H
Set the mode for starting an SFC
program.
• Initial Start
• Resume start
Initial Start
MELSEC-Q/L/
QnA
Programming
Manual (SFC)
Start Conditions
8003
H
Set the conditions for starting an SFC
program.
• Autostart Block 0
• Do not Autostart Block 0
Autostart Block 0
Output Mode When the
Block is Stopped
8006
H
Set the output mode for the case of a
block stop.
•Turn OFF
• Keep ON
Turn OFF
To Next Page
Loading...
Need help?
General
