8
PARAMETERS
8.1 PLC Parameters
8.1.2 High Performance model QCPU, Process CPU, Redundant CPU
8
- 19
1
Overview
2
Performance
Specification
3
Sequence Program
Configuration and
Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files
Handled by CPU Module
6
Functions
7
Communication with
Intelligent Function
Module
8
Parameters
* 2 : Cannot be set when the Redundant CPU is used.
Table8.15 PLC RAS list (Continued)
Item Parameter No. Description Setting range Default value Reference
Operating
mode when
there is an
error
Computation
error
3002H
Set the operation mode of the
CPU module at error detection.
Stop/Continue Stop Section 6.17
Expanded
command
error
Fuse blown
I/O module
compari-
son error
Intelligent
module
program
execution
error
Memory
card
access
error
Memory
card
operation
error
External
power sup-
ply OFF
Error check
Carry out
battery
check
3001
H
Set whether the specified error
will be checked or not.
Check/Do not check Check Section 6.17
Carry out
fuse blown
check
Carry out I/O
module
comparison
Constant scanning 3003
H
Set the constant scan time. 0.5ms to 2000ms (0.5ms unit) No setting Section 6.2
Low speed program
execution time
*2
3006
H
Set the execution time of a low
speed program every scan.
1ms to 2000ms No setting Section 3.3.3
Breakdown history 3005
H
Set the storage destination of the
CPU module failure history.
Store into program memory/
Store into the following history
file
Store into program
memory
Section 6.18
To Next Page
Loading...
