62 User Guide EN Dansensor® Lippke® 5000
P/N 380419-C
05/2022
Acknowledge
Measurement buttons
The buttons appear on the test screen if
Acknowledge Measurement is enabled in Main Menu
-> Workflow.
Press the appropriate button after performing a test to
Validate test
Mark test as invalid
Mark test as invalid and apply additional comment
The choice determines how the test is recorded in the
collected data list - see
"Collected data" on page 106 for details.
Icons for
Package Connection
and Package Type
The icons show the settings for the Package Connection and
Package Type parameters for the currently selected test
definition.
Package Connection
Separate Feed/Sense
Combined Feed/Sense
“Combined Feed/Sense” applies if the test head or the
“Combined” type hand-held needle is used.
“Separate Feed/Sense” applies to all other types of needles
and accessories.
Package Type
Normal
Porous
VTU
User icon This icon shows the access level of the current user:
Standard Test Operator
Operator
Supervisor
Administrator
Service
See "Access" on page 97 for details about users and access
levels.
Pressing this icon will log out the current user and take you to
the Access screen from where you can select another user or
login as Administrator.
Current user Currently selected user.
To select another user, press User icon .
To Next Page
Loading...
