Moog IMI220-145D001 - Regulator parameters

PARISON CONTROLLER
moog
62 MAN145-UM-D01A-EN Moog Italiana srl - Bergamo
Figure 55
Flat: Interpolation between two masters: the
interpolation type visualized corresponds to the area
where the cursor is placed.
Figure 56
Parabolic 1: (parabola with tangent 0 on start point)
Interpolation between two masters: the interpolation
type visualized corresponds to the area where the
cursor is placed.
Figure 57
Parabolic 2: (parabola with tangent 0 on end point)
Interpolation between two masters: the interpolation
type visualized corresponds to the area where the
cursor is placed.