6-19
iControl Messages
iControl AC
6
Car delayed with doors opening, CAR DEL DOORS OPENING
Description: A car, with doors opening, has been delayed in reaching an assigned destination.
Car Reaction: Assigned hall calls will be reassigned to other available cars.
Troubleshooting:
1. Determine what is inhibiting the doors from opening.
2. Check the event log for any faults that may have prevented the doors from opening.
Car delayed with doors stalled, CAR DEL DOORS STALLED
Description: A car, with doors stalled, has been delayed in reaching an assigned destination.
Car Reaction: Assigned hall calls will be reassigned to other available cars.
Troubleshooting:
1. Determine what is inhibiting the doors from closing.
2. Check the event log for any faults that may have prevented the doors from closing.
Car delayed with unknown door position, CAR DEL DOORS UNKNOWN
Description: A car, with unknown door position, has been delayed in reaching an assigned destination.
Car Reaction: Assigned hall calls will be reassigned to other available cars.
Troubleshooting:
1. Determine what is causing the doors to be reported in an invalid condition.
Car Dispatch Load. Not currently used.
Car Door Bypass, CAR DOOR BYPASS
Description: Car Door Bypass switch on iBox is in Bypass position. (View-only on iView Safety screen,
enabled/disabled by MCE according to safety jurisdiction.)
Car Reaction: Car is placed in Inspection mode. To move the car, you must place it in either cartop or car
panel inspection mode. No other modes of operation are allowed.
Car Heavy Load Activated - Hall Calls Bypassed, CAR HEAVY LOAD
Description: Load in the car has exceeded the Heavy Load Threshold setting.
Car Reaction: Hall calls are bypassed until the heavy load condition is cleared. Hall calls assigned to this car
are reassigned to other cars if possible.
Troubleshooting: (If displayed in error)
1. Verify programmed “Heavy Load Threshold”; adjust if needed (Load Weigher Configuration screen).
2. Determine if load in car exceeds Heavy Load Threshold. Calibrate load weigher if needed.
3. For discrete input load weighers, check Heavy Load Input shown on job prints.
Car Heavy Load - Deactivated
Car out of service with doors closed, CAR OS DOORS CLOSED
Description: Delayed car with closed doors has remained so for excessive period of time (determined by
user-programmed timer, Car Operation Screen/Passenger tab.
Car Reaction: Car removes itself from car and hall call service (car calls are canceled and hall calls are can-
celed or reassigned).
Troubleshooting:
1. Determine what is inhibiting the car from reaching its destination.
2. Check the event log for any faults that may have prevented the car from moving.
Car out of service with doors closing, CAR OS DOORS CLOSING
Description: Delayed car with closing doors has remained so for excessive period of time (determined by a
user-programmed timer, Car Operation Screen/Passenger tab.
Car Reaction: Car removes itself from car and hall call service (car calls are canceled and hall calls are can-
celed or reassigned).
Troubleshooting:
1. Determine what is inhibiting the car from reaching its destination.
2. Check the event log for any faults that may have prevented the car from moving.
Table 6.3 iControl Messages
iControl Messages
To Next Page
Loading...
Need help?
General
