6802800U74-AN
Chapter 4: Hardware Installation
4.13.2
Recommended Test Equipment
The following table lists the test equipment recommended for installation. Procure the following
equipment locally as it is not part of the MTS shipment. All model numbers are Motorola Solutions part
numbers unless noted otherwise.
Table 29: Recommended Installation Test Equipment
Test Equipment Model/Type Supplier Description
Digital Multimeter (only
1 required)
Fluke 77 Fluke AC/DC measurements.
Equivalent instrument is
acceptable
Time Domain Reflec-
tometer (TDR)
Ground Resistance
Ohmmeter
AEMC 3700 clamp-on
ground tester
Locally Pro-
cured
Locally Pro-
cured
Possibly needed by Field
Installation Team
Possibly needed by Field
Installation Team
Service Computer Locally Pro-
cured
Service Connector Box p/n: 0166502N05 Motorola Solu-
tions
Local service terminal
Used for measuring receiv-
er sensitivity
Basic Service Cable
(RS232)
p/n: 3066565B01 Motorola Solu-
tions
For pinout information, see
Site Controller – Front Pan-
el Connectors on page 301
TETRA Signal Genera-
tor
Rhode & Schwarz:
SMU200A + SMU-K68
Rhode &
Schwarz
Used for checking receive
and transmit operation
TETRA Analyzer Rhode & Schwarz:
FSQ + FS-K110 +
FSQ-K70
Used for checking receive
and transmit operation
RF Attenuator, 250 W,
40 dB
Weinschel 404043 Protection for HP89441A
RF Attenuator, 10 dB minimum 100 W Motorola Solu-
tions
Protection for HP89441A
RF Adapter 33 QMA-N-50-1/133
NE
Huber & Suh-
ner
N female to QMA male
RF Adapter 31 N-QMA-50-1/1- -NE Huber & Suh-
ner
RF Adapter 33_716-N-50-1/- -_UE Huber & Suh-
ner
N female to QMA female
N female to DIN 7-16 male
To Next Page
Loading...
Need help?
General
