6802800U74-AN
Chapter 6: Configuration and Testing
6.5.1
Base Radio Startup Sequence
Verify the following LED conditions on the base radio controller according to the following table.
Table 77: Base Radio LEDs: Normal Startup Sequence
LED test (flashing multicolor)
Waiting for SWDL this is where the BR will wait if no Site Con-
troller is present.
BRC main application is running
Table 78: Base Radio LEDs: Hardware Failure
LED test (flashing multicolor)
Waiting for SWDL this is where the BR will wait if no Site Con-
troller is present.
BRC main application is running but an alarm is preventing
the BRC from keying
To Next Page
Loading...
Need help?
General
