6802800U74-AN
Chapter 5: Interconnection and Internal Cabling
NOTICE: Either X.21 or E1 cabling is used, depending on which option is ordered.
User Alarms/Controls cabling refer to the cabling between the Site Controller and the connector on the
Junction Panel.
RGPS and GPS cabling refer to the cabling between the Site Controller and the connectors on the
Junction Panel.
NOTICE: X.21 and RGPS cabling depends on ordered configuration.
5.2.1
User Alarms/Controls, X.21, RGPS, and GPS Cabling – MTS LiTE
Table 37: User Alarms/Controls, X.21, RGPS, and GPS Cabling for MTS LiTE
In-
dex
Cable Part
Number
From Unit/ Con-
nection Name
To Unit/ Con-
nection Name
Notes
MTS LiTE with RGPS and E1 or RGPS and X.21
2a
3066546B
Junction Panel/
X.21
Site Controller/
15 pin D male connector
type
2b
09
3a
3066549B
Junction Panel/
RGPS
Junction Panel/
User Alarms/
X.21/Remote
GPS
Site Controller/
15 pin D female connector
type
25 pin D female connector
type
03
Controls
Alarm/Controls
3b Door Alarm Molex connector type
MTS LiTE with Internal GPS and X.21
1 3066543B
23
2a 3066546B
10
3a
3066549B
Junction Panel/
GPS
Junction Panel/
X.21
Junction Panel/
User Alarms/
Site Controller/
GPS
Site Controller/
X.21/Remote
GPS
Site Controller/
Coax cable
N/A
25 pin D female connector
type
03
Controls
Alarm/Controls
3b Door Alarm Molex connector type
MTS LiTE with Internal GPS and E1
1 3066543B
23
3a
3066549B
Junction Panel/
GPS
Junction Panel/
User Alarms/
Site Controller/
GPS
Site Controller/
Coax cable
25 pin D female connector
type
03
Controls
Alarm/Controls
3b Door Alarm Molex connector type