6802800U74-AN
Chapter 1: MTS Overview
BR-Arch-1 boot process
NOTICE: At this point you can interrupt booting of BR Application and and log on to BOOT1. If
you do not interrupt the process, BR continues booting and displays the following output.
Booting image from /gzip//tftp/10.00.253.01/brc.code.1.rlj.
ELF segment 0: Writing 0x540 bytes to addresses 0x40000 - 0x4053f.
ELF segment 1: Writing 0x320050 bytes to addresses 0x40540 -
0x36058f.
ELF segment 2: Writing 0xa7ec bytes to addresses 0x360590 - 0x36ad7b.
ELF segment 3: Writing 0x1000 bytes to addresses 0x36ad7c - 0x36bd7b.
ELF segment 4: Writing 0x107160 bytes to addresses 0x36bd7c -
0x472edb.
ELF segment 5: Skipping since filesize = 0 (BSS).
ELF segment 6: Skipping since filesize = 0 (BSS).
Total text + data = 0x432edc, total bss = 0x204b590.
Transferring control to image entrypoint at 0x40558.
Starting FAM...
Flash area base:0x10000000 size:0x800000 driver:cfi params:
Checking partitions...
Listing partitions on ramdisk:0
# VolName Lo Hi Format
0 0 3 partman
1 4 2031 hafsfat
Verifying partition:1 name:ram device:ramdisk unit:0 lo:4 hi:2031
format:hafsfat
Mounting volumes...
Mounting volume: volume/1
Mounting volume /ramlog format:clfs device:clfs
params:type=ram,blocksize=0x4000,size=0x48000
Mounting volume: volume/2
Mounting volume /log format:clfs device:clfs
params:type=flash,blocksize=0x20000,size=0x200000,start=0x12040000
Mounting volume: volume/3
Mounting volume /ram format:hafsfat device:ramdisk
params:unit=0,partition=1,quick
Checking flash objects... SUCCESS
username: Downloading configuration file (brc02.cf.2)... SUCCESS
NOTICE: BR Application is started, BR offers call services now, you can log in.
POLO(release) ver. MTS_BRC_BOOT1-R08.40.02
FEATURES flash telnetd testapp auxcmds /tftp /gzip dns boardparam
Local Ethernet address. .... 00:25:F1:28:DF:D2
Local Ethernet address. .... 00:25:F1:28:DF:D3
DNS resolver not configured.
These are the boot parameters:
autoboot. ............. yes
boot timeout...........5 seconds
boot method 1..........
boot method 2..........
boot method 3..........
boot method 4..........
Press CTRL-C or ESCAPE to interrupt autoboot process, SPACE for
instant boot.
***
password:
*** You are now logged in with Factory access ***
BR)