4. Introducing the Server
Chapter 1 General Description
Installation and Setup of Management Software
Set parameters of installed software to match your hardware/network environment.
Define the management PC on a network connectable to the server and install the management and
monitoring software.
Refer to Chapter 2 (6. NEC ESMPRO) for details.
System Information Backup
After changing the hardware configuration or changing the BIOS setting, back up
the system information
using backup/restore feature of Remote Management. See
Chapter 3 (7.7.3 Backup/Restore) for details.
When the server fails and system information is lost, the status of the server
recovered to the status before the failure by restoring the backed up information.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
119
To Next Page
Loading...