NEC express5800 A2010b - Chapter 3 Setup

NEC Express5800 Series
Express5800/A1040b, A2040b,
A2020b, A1020b
Setup
This chapter describes how to set up the server.
1. Before Starting Setup
Describes about points to be checked before starting setup.
2. Setup
Describes about setup sequence.
3. Turning on the Server
Describes how to turn on the server.
4. System BIOS Setup
Describes how to configure system BIOS.
5. EXPRESSSCOPE Engine SP3
Describes about EXPRESSSCOPE Engine SP3 installed in the server.
6. EXPRESSBUILDER
Describes about EXPRESSBUILDER.
7. Using Remote Management
Describes how to use remote management feature.
8. SMASH-CLP
Describes about SMASH-CLP.
9. WS-Management
Describes about WS-Management.
10. Installing Software Components
Describes about installation of OS and bundled software.
11. Turning off the Server
Describes how to turn off the server.
3
3
248