NEC express5800 A2010b - Removing Front Bezel

1. Installing / Removing Internal Options
Chapter 2 Preparations
1.6 Removing Front Bezel
Remove the front bezel when pressing switches such as SYSTEM POWER switch.
Note
You can skip this step if your server is not equipped with front bezel.
Insert the Bezel Lock Key into the key slot and turn the key to the front bezel side while pressing it lightly to
release the lock. Move the front bezel toward right to disengage tabs from frame, and remove the front bezel
from chassis.
Important
Be careful not to press the SYSTEM POWER switch when removing the front bezel.
Turn to unlock.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
164