NEC express5800 A2010b - Using Remote Management; Login and Logout; Login

7. Using Remote Management
Chapter 3 Setup
7. Using Remote Management
Before using remote management, read thoroughly Chapter 3 (5. EXPRESSSCOPE ENGINE SP3).
7.1 Login and Logout
7.1.1
Login
① User Name / Password
Enter the user name and password.
At shipment (initial state), use the default user name and password to login.
– Default IP address: 192.168.1.100(*1)
(*1) Default IP address for standby BMC is 192.168.1.101.
– Default user name: Administrator
– Default password: Administrator
② Secure Mode / Non Secure Mode
Select Secure Mode (https) or Non Secure Mode (http). Secure mode is recommended.
③ [Login] button
Click the [Login] button after entering your user name and password.
④ Language
You can select the display language on this page. The login language depends on browser and is stored in
coolie for 30 days.
⑤ Help
The online help is displayed.
②
①
③
④
⑤
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
287