NEC express5800 A2010b - Description on On-Screen Items and Key Usage

4. BIOS Setup Utility (SETUP)
Chapter 3 Setup
4.3 Description on On-Screen Items and Key Usage
This section shows display examples and how to control the key. Use the keyboard to work with SETUP.
 Cursor keys (<↑>, <↓>)
Select an item displayed on the screen. If characters of an item are highlighted, that means the item is
currently selected.
 Cursor keys (<←>, <→>)
Select menus including Main, Advanced, Security, Server, Boot, and Save & Exit.
 <−> key/<+> key
Change the value (parameter) of the selected item. You cannot use this key when a menu which has
on the left is selected.
 <Enter> key
Press this key to confirm the selected parameter.
 <Esc> key
Pressing this key takes you to the previous screen. If you keep pressing the key, the following window is
displayed. If you select Yes, SETUP closes without saving the changed parameters.
Quit without saving?
[Yes] No
 <F1> key
Press this key to display help information. If you need help using SETUP, press this key. Press <Esc>
key to go back to the original screen.
Indicates the currently displayed menu
Help
Parameters (highlighted when selected*)
*: Items that cannot be specified are dimmed.
Setting items
Indicates the
menu has
submenus.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
259