7. Using Remote Management
7.5 Remote Access
7.5.1
Power Control
Use this page to confirm power status of the server, configure BIOS, and perform power control of the server.
• Click the [Remote Access] tab to display available menus.
• Select [Power Control] from menu tree in left pane.
Buttons
① Displays power status of the server (Power ON or Power OFF).
② You can change boot device.
③ You can change settings of system BIOS at startup.
④ You can control the system power.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
308
To Next Page
Loading...