NEC express5800 A2010b - Basic Commands; Exit; Help; Reset

8. SMASH-CLP
Chapter 3 Setup
8.16.3
Basic Commands
This section describes basic commands available in the command line interface of standby BMC.
8.16.4
cd
Syntax
cd [<options>] [<target>]
Description
The cd command changes the current default target to the target specified by the <target> argument.
8.16.5
exit
Syntax
exit [<options>]
Description
The exit command terminates and logs out the user session.
8.16.6
help
Syntax
help [<options>] [<help topics>]
Description
A basic command, <command>, can be specified for the <help topics>. The help command displays the help
string for specified basic command when <command> argument is specified.
8.16.7
reset
Syntax
reset [<options>] [<target>]
Description
The reset command performs a hardware reset on the <target>. /admin1/sp1 is available for the <target> of the
reset command. When /admin1/sp1 is specified, the standby BMC is reset.
Important
Use the reset command only when a trouble occurs on BMC.
Do not use the reset
command in normal operation. The
connections with Web browser and SSH client
are disconnected if you reset the BMC.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
444