NEC express5800 A2010b - EXPRESSSCOPE Engine SP3; Overview; Default Network Settings; A1040 B

5. EXPRESSSCOPE Engine SP3
Chapter 3 Setup
5. EXPRESSSCOPE Engine SP3
5.1 Overview
EXPRESSSCOPE Engine SP3 provides a variety of features using BMC (Baseboard Management Controller),
which is a system management LSI.
EXPRESSSCOPE Engine SP3 monitors the power supply unit, fans, temperature, and voltage of the server. If
you have the management LAN port connected to the network, you can remotely perform the following through
a web browser or SSH client:
• Manage the server
• Remotely control the keyboard, video, and mouse (KVM)
• Remotely access a CD/DVD/floppy disk/ISO image/USB memory
5.2 Default Network Settings
Shown below are default values used when connecting the server to network.
5.2.1
A1040b
IPv4 address: 192.168.1.100,
IPv6 address: Link local address (*2), no global address
User name: Administrator
Password: Administrator
HTTP: Enabled
HTTPS: Enabled (*1)
SSH: Enabled
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
266