5. Names and Functions of Components
Chapter 1 General Description
5. Names and Functions of Components
This section describes the names of the server components.
5.1 Front View (with Front Bezel Mounted)
1) SYSTEM POWER LED ( )
Indicates power status of server.
(See Chapter 1 (5.6.1 SYSTEM POWER LED (
).)
(5)-4: PSU/FAN LED
(5)-5: NEXT LED
(See Chapter 1 (5.6.5
FRU (CPU, MEM, PCI, PSU/FAN,
NEXT, MISC) LED).)
(5)-6: MISC LED
(5)-7: CNFG LED
(See Chapter 1 (5.6.6 CNFG LED).)
(5)-8: VLT/TMP LED
(See Chapter 1 (5.6.7 VLT/TMP LED).)
2) UID (Unit ID) LED
Used to identify the target server.
(See Chapter 1 (5.6.2 UID LED).)
6) Location LED
Indicate locations of failed component.
Details are as follows:
(6)-1: Location (#4)
(6)-2: Location (#5)
(6)-3: Location (#6)
(6)-4: Location (#7)
(6)-5: Location (#0)
(6)-6: Location (#1)
(6)-7: Location (#2)
(6)-8: Location (#3)
(See Chapter 1 (5.6.8 Location LED).)
3) SYSTEM STATUS LED ( )
Indicates the system status.
(See Chapter 1 (5.6.3 SYSTEM STATUS LED ( )).)
4) DISK ACCESS LED ( )
Indicates access status of all hard disk drives.
(See Chapter 1 (5.6.4 DISK ACCESS LED ( )).)
5) FRU LED
Indicate failed component. Details are as follows:
(5)-1: CPU LED
(5)-2: MEM LED
(5)-3: PCI LED
(4) (1) (2) (3) (6)-4
(6)-3
(6)-2
(6)-1
(5)-4
(5)-3
(5)-2
(5)-1
(6)-8
(6)-7
(6)-6
(6)-5
(5)-8
(5)-7
(5)-6
(5)-5
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
127
To Next Page
Loading...