NEC express5800 A2010b - Expressbuilder; Features of EXPRESSBUILDER; Starting EXPRESSBUILDER

6. EXPRESSBUILDER
Chapter 3 Setup
6. EXPRESSBUILDER
EXPRESSBUILDER helps you to install operating system or maintain the server.
6.1 Features of EXPRESSBUILDER
EXPRESSBUILDER provides the following features.
Features
Descriptions
Setup
(OS reinstallation)
Installs Windows on your server. Easily completes the process from RAID
configuration to installation of applications. To use this feature, select
Os
installation
in the menu which appears after boot.
Bundled software *
Stores various bundled software (such as NEC ESMPRO Agent).
Maintenance
Diagnoses your server system. To use this feature, select
Tool menu
in the menu
which appears after boot.
Documents *
Stores various documents including this guide.
* Documents and some software components are not stored in Internal Flash Memory (option).
6.2 Starting EXPRESSBUILDER
If you want to build RAID system or install OS, start EXPRESSBUILDER by using any of the following.
EXPRESSBUILDER DVD:
Set the DVD on the drive and either turn on the server or restart the server by pressing <Ctrl> + <Alt> +
<Delete>. EXPRESSBUILDER is booted from DVD.
If you want to install any bundled software or read documents, set the DVD to a computer on which
Windows is running. Autorun menu appears automatically.
Internal Flash Memory (option):
During POST, press <F3>. If you start with this option, make sure that the media was removed from the
drive.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
286