NEC express5800 A2010b - Optical Disk Drive; Installation

1. Installing / Removing Internal Options
Chapter 2 Preparations
1.7 Optical Disk Drive
This section describes the procedure for installing the optical disk drive.
Important
Do not install any unsupported optical disk drive.
1.7.1
Installation
Install an optical disk drive in the following procedure.
1. Set to the maintenance mode. See Chapter 3 (7.7.1 BMC – (7) Extended Functionality) for details.
2. Refer to Steps 3 to 4 in Chapter 2 (1.4 Overview of Installation and Removal) for preparations.
3. Insert the optical disk drive into the slot of optical disk drive.
4. Push the optical disk drive completely until the lock levers on both ends are locked with clicks.
Important
Insert the optical disk drive straight into the slot. If the drive is inserted obliquely or
applied excess force, the optical disk drive and internal connector may be damaged.
Optical disk drive
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
165