2. Installation and Connection
2.2 Connection
Connect peripheral devices to the server.
Connectors for peripheral devices are provided at the front and rear of the server. Images on the following
pages show the peripheral devices that can be connected in their standard state and their respective connector
positions.
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury.
Safety precautions in Precautions for Use.
• Do not hold the power plug with wet hands
• Do not connect the ground wire to a gas pipe
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage.
details, refer to Safety precautions in Precautions for Use.
• Use only the specified outlet to insert.
•
Do not connect the power cord to an outlet that has an illegal number of
connections.
• Insert the power plug into the outlet as far as it goes.
• Use only the specified power cable.
• Do not connect or disconnect the interface cable with the power plugged in the
outlet.
• Use only the specified interface cable
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
237
To Next Page
Loading...