1. Installing / Removing Internal Options
1.8.1
Installation
Install a hard disk drive by using the following procedure.
In the RAID System, use hard disk drives that have the same specifications (
rotational speed, and standard).
1. Set to the maintenance mode. See Chapter 3 (7.7.1 BMC – (7) Extended Functionality) for details.
2. Refer to Steps 3 to 4 in Chapter 2 (1.4 Overview of Installation and Removal) for preparations.
You can install hard disk drive online (while the server is powered on).
3. Locate the slot where you install the hard disk drive.
The server has 8 slots. Install hard disk drives in ascending order of port number.
4. Remove the HDD dummy tray.
Keep the dummy tray for future use.
5. Unlock the handle of the tray.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
169
To Next Page
Loading...