NEC express5800 A2010b - Maintenance; Hardware Log

7. Using Remote Management
Chapter 3 Setup
7.9 Maintenance
7.9.1
Hardware Log
Overview
Use this page to collect hardware log in the server and view Activity logs.
Administrator privilege is required to collect or clear the hardware log.
• Click the [Maintenance] tab to display available menus.
• Select [Hardware Log] from menu tree in left pane.
Buttons
① Download BMC Dump button
Press the [Download BMC Dump] button to execute BMC Dump (colletion of hardware logs and internal logs
of BMC), and download the log file.
② Dispaly Activity Log button
Press the [Dispaly Activity Log] button to display list of Activity Logs. Activity Log contains OEM SEL and
Generic SEL (defined in IPMI specification).
③ [Reload] button
Press the [Reload] button to display the latest information.
④ Status display
When the [Download BMC Dump] button is pressed, the log collection status is displayed on this area.
(1)
Collect Hardware Log
Press the [Download BMC Dump] button.
It takes approximately 3 minutes to complete log collection.
When hardware logs have been collected, a popup message "Hardware logs are collectged" is displayed. When
you press the [OK] button, a popup message whether you want to open the file or save the file. Select [Save] to
save the downloaded hardware logs in remote terminal.




Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
384