NEC express5800 A2010b - Access Log

8. SMASH-CLP
Chapter 3 Setup
8.9 Access Log
This feature records login/logout events made through HTTP/HTTPS/SSH connection, logs related to system
management and operations to modify settings via web browser. You can display, clear, and set the access log
through the command line interface.
Important
The user must have an account as administrator for changing setting
of system
event log through the command line interface.
Tips
• The following events are supported by the Access Log feature.
– Login and logout to/from HTTP, HTTPS, and SSH connections
– System control (Power OFF/ON, and others) via Web browser.
– Modify the setting (Network setting, and others) via Web browser.
– Event to start the remote KVM
• User Information is not registered by logout events for SSH connections.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
420