NEC express5800 A2010b - Hard Disk Drive

1. Installing / Removing Internal Options
Chapter 2 Preparations
1.8 Hard Disk Drive
The server has device bay for hard disk drive located at the front of the server.
A hard disk drive mounted in a dedicated tray can be purchased. Install the hard disk drive on the server with it
mounted on the tray. Install a hard disk in the following order.
 Single RAID card configuration: Port 0 → 1 → 2 → 3 → 4 → 5 → 6 → 7
 Two RAID cards configuration:Port 0 → 4 → 1 → 5 → 2 → 6 → 3 → 7
Important
Use hard disk drives specified by NEC. Installing a third-party hard disk d
rive might
cause a failure of the server as well as the hard disk drive.
Note the following precautions to install hard disk drives.
• Hard disk drives having different capacities, interface types, or rotational speeds cannot be installed
together.
Bays can contain up to 8 hard disk drives.
Port numbers have been assigned to each slot.
Port 1
Port 3
Port 5
Port 7
Port 0
Port 2
Port 4
Port 6
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
168