1. Installing / Removing Internal Options
5. When the optical disk drive is unlocked, pull it out from the slot completely.
Pull out the optical disk drive straight from the slot.
If the drive is pulled out
obliquely or applied excess force, the optical disk drive and internal connector may
be damaged.
6. Refer to Steps 6 to 10 in Chapter 2 (1.4 Overview of Installation and Removal) to check if work is
successfully completed.
7. Cancel the maintenance mode you have set in Step 1. (See Chapter 3 (7.7.1 BMC – (7) Extended
Functionality) for how to cancel the maintenance mode. If the UID LED is on, turn off the UID LED using
UID switch.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
167
To Next Page
Loading...