NEC express5800 A2010b - Connecting to Uninterruptible Power Supply (UPS)

2. Installation and Connection
Chapter 2 Preparations
2.2.2 Connecting to Uninterruptible Power Supply (UPS)
To connect the power cord of the server to a UPS, use the connector output on the rear of the UPS. For details,
refer to the manual supplied with the UPS.
To link power supply of the server with that of UPS, change BMC configuration using web console menu.
Select [Configuration] - [BMC] - [Power Option] - [AC LINK] parameter, and set it to [Power On].
See Chapter 3 (7.7.1 BMC (6) Miscellaneous) for details.
Option slot
Computer interface port (UPS)
Overload protection
reset button
Connector outputs
Input connector
(NEMA5-15P)
Voltage sensitivity setting button
Computer interface port (COM)
TVSS device connector
<Example>
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
247