4. Introducing the Server
Chapter 1 General Description
4.2.3
Using Operation Management Features
To perform operation management such as fault monitoring on the server, NEC ESMPRO Agent and NEC
ESMPRO Manager, or software sold separately is required. Follow the instruction of the setup procedure
described in Installation Guide (Windows / Linux) or the description of the software (when sold separately) to
install and provide settings.
Note the following when using operation management feature.
When Using Server Management Feature
Setting threshold values on NEC ESMPRO Manager and on NEC ESMPRO Agent is required depending on
the monitoring items such as the usage condition of each component of the server (e.g., processor, memory,
disk, and cooling fan) or the stall monitoring of OS. Refer to the descriptions of each software or online help for
details.
When Using Storage Management Function
The following software is required in addition to the RAID Controller (option) and NEC ESMPRO Agent to
manage the RAID system.
• When using RAID system
Install Universal RAID Utility when using the RAID system.
When using option board, refer to the manuals of each board for installation.
• When using backup file system
Make sure to clean up the head of the drive periodically by the cleaning tape when using the tape drive. Dirt
on the head of the drive causes reading and writing error and the data cannot be backed up or restored
properly.
When Using Power Management Function
• Setting up the dedicated control software is required to use Uninterruptible Power System (UPS).
• Change the setting of the UPS to match your environment for automatic operation or automatic booting at
the recovery from power failure when using the UPS.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
120
To Next Page
Loading...