NEC express5800 A2010b - Diagnostics

7. Using Remote Management
Chapter 3 Setup
7.9.4
Diagnostics
Overview
Use this page to diagnose spare hardware component (not yet incorporated into the running OS). Administrator
privilege is required to use this feature.
• Click the [Maintenance] tab to display available menus.
• Select [Diagnostics] from menu tree in left pane.
Buttons
① [Spare Component]
Select a spare hardware component to diagnose. The diangnosis can be performed on the following
components:
– Not Selected: No component is selected by default setting
– MR(x): The specified MR(x=1 to 8) is diagnosed.
– PCI(y): The specified PCI PCI (y=1 to 16) is diagnosed.
– CPUs: All of the spare CPU cores are diagnosed.
– PCIs: All of the spare PCIe cards are diagnosed.
– All Spare Components: All of the spare components are diagnosed.
I
mportant
• Diagnostic of MR requires the installations of the dedicated software.
• Refer to "MR Hot-Add User's Guide" on
http://www.58support.nec.co.jp/global/download/index.html.
② [Execute Diagnostics] button
Pressing the [Execute Diagnostics] button starts diagnosis on spare component specified in [Spare
Component]. Administrator or Operator privilege is required to use this feature.
③ [Diagnostics Number]
Shows Diagnostic Number executed last.
④ [Diagnostics Log]
Enter the Diagnostics Number you want to search.
⑤ [Search] button






Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
393