1. Installing / Removing Internal Options
1.11 Internal Flash Memory
An optional Internal Flash Memory is used to copy EXPRESSBUILDER in motherboard in the server. Using
Internal Flash Memory allows you to launch EXPRESSBUILDER during POST. You do not need to use DVD,
and can setup the server easily and maintain it quickly.
1.11.1 Installation
Ask your service representative who is authorized by NEC to install the component. The service representative
will install the component, and transfer the server to you after making sure that the server can operate normally.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
187
To Next Page
Loading...