8. SMASH-CLP
8.4.8
stop
Syntax
stop [<options>] [<target>]
Description
The stop command performs a normal power off request (OS shutdown request) or a forced power off request.
/admin1/system1 is available for the target of the stop command. The stop command performs a normal power
off request (OS shutdown request) to the server if /admin1/system1 is specified by the <target>.
The command with -f (or -force) as the <options> performs a forced power off request to the server if
/admin1/system1 is specified by the <target>.
8.4.9
version
Syntax
version [<options>]
Description
The version command is used to display the version of the command line protocol specification which is
supported.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
413
To Next Page
Loading...