1. Installing / Removing Internal Options
1.18.2
Removal
Take the steps below to remove SUV cable.
1. Loosen the screw and remove the cover.
2. Pull the SUV cable out from the connector while pushing the lock levers at top and bottom of connector.
Pull out the SUV cable straight from the port. If the cable is pulled out obliquely or
applied excess force, the inlet of SUV cable and internal connector may be damaged.
3. Mount the cover you have removed in Step 1.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
208
To Next Page
Loading...