NEC express5800 A2010b - Port Number

5. EXPRESSSCOPE Engine SP3
Chapter 3 Setup
5.5.5
Port number
EXPRESSSCOPE Engine SP3 uses the following ports. If your network environment has a firewall, set it
appropriately.
Module name Port number Protocol
Direction
viewed from
BMC
Module name Port number
Remote media
(Encryption disabled)
Unassigned TCP IN BMC 5120 (CD/DVD)
5122 (USB MEM)
5123 (FD) (*1)
Remote media
(Encryption enabled)
Unassigned TCP IN BMC 5124 (CD/DVD)
5126 (USB MEM)
5127 (FD) (*1)
Web console
(Encryption disabled)
Unassigned TCP IN BMC 80 (*1)
Standby Web console
(Encryption disabled)
Unassigned TCP IN BMC 5080 (*1)
WEB console
(Encryption enabled)
Unassigned TCP IN BMC 443 (*1)
Remote KVM
(Encryption disabled)
Unassigned TCP IN BMC 7578 (*1)
Remote KVM
(Encryption enabled)
Unassigned TCP IN BMC 7582 (*1)
SSH Unassigned TCP IN BMC 22 (*1)
Standby SSH Unassigned TCP IN BMC 5022 (*1)
SMTP 25 (*1) TCP OUT BMC Unassigned
LDAP 389 (*1)(*2) TCP OUT BMC Unassigned
SNMP Trap 162 UDP OUT BMC Unassigned
DHCP 68 UDP OUT BMC Unassigned
RMCP+ Unassigned UDP IN BMC 623
Link with CLUSTERPRO 162 UDP OUT BMC Unassigned
Link with CLUSTERPRO 5570 UDP OUT BMC Unassigned
DNS 53 TCP/UDP OUT BMC Unassigned
WS-MAN
(Encryption disabled)
Unassigned TCP IN BMC 80 (*1)
WS-MAN
(Encryption enabled)
Unassigned TCP IN BMC 443 (*1)
RMCP+ for maintenance
LAN
Unassigned UDP IN BMC 52331 (*3)
Web console for
maintenance LAN
Unassigned TCP IN BMC 5080 (*4)
SSH for maintenance LAN Unassigned TCP IN BMC 5022 (*4)
(*1) Setting can be changed.
(*2) 636 when using TLS/SSL
(*3) Valid only for maintenance LAN of master BMC (169.254.255.254). Setting cannot be changed.
(*4) Setting cannot be changed.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
274