NEC express5800 A2010b - Page 265

4. BIOS Setup Utility (SETUP)
Chapter 3 Setup
Command
Description
mm
mm Address [Width 1|2|4|8] [;MMIO| ;
MEM| ; IO | ;PCI] [:Value] [-n]
Display/change MEM/IO/PCI.
mode mode [row col] Display/change console output device mode.
mv mv src [src ...] [dst] Move file/directory.
openinfo openInfo Handle Display handle/agent protocol.
pci pci [Bus Dev [Func] [-i] [-s [Seg]]] Display configuration space for PCI device.
reconnect reconnect -r Re-connect EFI driver.
reset reset [-w|-s [string]] Reset or shut down system.
rm rm [-q] file [file ...] Delete file/directory.
set set [-d|-v|-b] [sname [value]] Display/create/change/delete EFI environment variable.
smbiosview
smbiosview [-t smbiosType]|[-h
smbios handle]|[-s]|[-a]
Display SMBIOS information.
time time [hh:mm[:ss]] Display current time or set time.
timezone timezone [-s hh:mm | -l] [-b] [-f] Display or set time zone.
type type [-a|-u] [-b] file [file ...] Display file contents.
unload unload [-n] [-v] handleIndex Unload protocol image.
ver ver [-s] Display version information.
vol vol [fs] [-n <volume label>] Display volume information of file system.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
265