NEC express5800 A2010b - Page 309

7. Using Remote Management
Chapter 3 Setup
(1)
Change one time boot device
If you need to change boot device, select other than "No change". This setting is made valid when you execute
power ON next time, reset, cycle power, or OS shutdown reboot on the Web browser, not by the power button
on the server nor the virtual power button.
Setting
Boot device
No change
Boot according to setting of System BIOS.
Preboot eXecution Environment(PXE)
Perform PXE boot.
Hard Drive
Boot from hard disk drive connected with the managed server.
FD/Primary removable media
Boot from FD drive or removable media connected with the
managed server.
CD/DVD Drive
Boot from CD/DVD drive connected with the managed server.
Remote media (FD)
Boot from FD drive (media) connected via remote media feature.
Remote media (CD/DVD)
Boot from CD/DVD drive (media) connected via remote media
feature.
Remote media (USB Memory)
Boot from USB memory connected via remote media feature.
Tips
This operation is not currently supported.
(2)
System BIOS
Press this button to change settings of BIOS at next bootup. This setting is made valid when you execute power
ON, reset, cycle power, or OS shutdown reboot next time.
To perform [BIOS Recovery], you need the dedicated CD-ROM media separately. For details refer to Chapter 2
(1. System BIOS) in Maintenance Guide.
Setup item
Current setting
Reset Param BIOS
Enable/Disable
When enabled, reset BIOS parameter setting.
BIOS PASSWORD Clear
Enable/Disable
When enabled, reset BIOS password.
BIOS Recovery
Enable/Disable
When enabled, recover BIOS settings.
BIOS Recovery is a function which is for recovering BIOS update
using CD/DVD with SATA DVD drive when BIOS update has
failed.
Note: BIOS Recovery is dedicated for maintenance personnel,
not for users. Ask your service representative who is authorized
by NEC to use it.
(3)
Power Control
Administrator or Operator privilege is required to use this feature.
Button
When pressed
Power ON
Power on the managed server. If the server is already powered on, this button has
no effect.
Forces Power OFF
Forcibly power off the managed server. If the server is already powered off, this
button has no effect.
Data may be lost by this operation.
Power Cycle
Forcibly power off the managed server, and then on. If the server is already
powered off, this button has no effect.
Data may be lost by this operation.
System Reset
Reset the managed server. If the server is already powered off, this button has no
effect.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
309