NEC express5800 A2010b - Page 122

4. Introducing the Server
Chapter 1 General Description
The availability of features
Item
Availability
Description
Hardware

Displays physical information of hardware.
Memory bank

Displays physical information of memory.
Device Info

Displays server-specific hardware information.
CPU

Displays physical information of CPU.
System

Displays logical information and monitors the rate of CPU load.
Displays logical information and monitors memory usage.
I/O device

Displays I/O device information (serial port, parallel port, keyboard,
mouse, and video).
System
environment

Monitors temperature, fan, voltage, power supply, and chassis door.
Temperature

Monitors temperature in the chassis.
Cooling fan

Monitors cooling fan unit.
Voltage *1

Monitors internal voltage.
Power supply

Monitors power supply unit.
Chassis cover
×
Monitors chassis intrusion (door open or close).
Software

Displays information on service, driver, and OS.
Network

Displays information on LAN and monitors packet.
BIOS

Displays BIOS information.
Local polling

Monitors MIB value that NEC ESMPRO Agent acquires.
Storage

Displays configuration information of storage device such as hard disk
drive and controller.
File system

Displays file system configuration and monitors free space.
RAID system

Monitors RAID controller shown below.
– Onboard RAID Controller (NE3303-173/NE3303-168)
– Optional RAID Controller (NE3303-H001)
Others *2

Monitors OS stall using watchdog timer.

Issues an alert after OS STOP error.

:Supported,
×
:Unsupported
*1: Not reported by NEC ESMPRO Agent because the server is rebooted when voltage alarm occurs.
For alert notification by other than NEC ESMPRO Agent, see Chapter 3 (7.7.1 BMC – (3) Alert).
*2: Not displayed on NEC ESMPRO Manager console.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
122