NEC express5800 A2010b - Page 129

5. Names and Functions of Components
Chapter 1 General Description
(
11) FRU LED
Indicate failed component. Details are as follows:
(11)-1: CPU LED
(11)-2: MEM LED
(11)-3: PCI LED
(11)-4: PSU/FAN LED
(11)-5: NEXT LED
(11)-6: MISC LED
(See Chapter 1 (5.6.5 FRU (CPU, MEM, PCI,
PSU/FAN, NEXT, MISC) LED).)
(11)-7: CNFG LED
(See Chapter 1 (5.6.6 CNFG LED).)
(11)-8: VLT/TMP LED
(See Chapter 1 (5.6.7 VLT/TMP LED).)
(
12) Location LED
Indicate locations of failed component. Det
ails are as
follows:
(12)-1: Location (#4)
(12)-2: Location (#5)
(12)-3: Location (#6)
(12)-4: Location (#7)
(12)-5: Location (#0)
(12)-6: Location (#1)
(12)-7: Location (#2)
(12)-8: Location (#3)
(See Chapter 1 (5.6.8 Location LED).)
(
13) Optical disk drive bay
Used to mount optical disk drive bay.
Either of the following drive can be installed.
– DVD-ROM drive
– DVD Super MULTI drive
(
14) 2.5-inch hard disk drive bay
The bay where hard disk drive is installed. The last
digit number indicates the corresponding slot
numbers.
All bays contain Dummy Trays at shipment.
(
15) USB connector
Used to connect devices that support the USB interface.
(
16) VGA connector
Used to connect display unit.
(
17) Slide tag
The tag in which the N code, the serial number, and
the
bar code of the serial number are printed.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
129