1. Installing / Removing Internal Options
(3) Installation
1. Check the direction of the cooling fan.
There are connecters on the bottom right end seen from the front of the server.
The cooling fan is configured not to be inserted with the rear and front sides reversed.
Pay attention to the direction of a cooling fan when mounting the cooling fan.
its front and rear sides as it is configured not to be inserted with the rear and front
sides reversed.
2. Hold openings on the top of a new cooling fan with forefingers and put it down slowly along its guide.
3. Push the cooling fan from the top until the lock levers are locked with a click sound.
4. Refer to Steps 6 to 10 in Chapter 2 (1.4 Overview of Installation and Removal) to check if work is
successfully completed.
5. Close the top cover of the server.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
185
To Next Page
Loading...