2. Installation and Connection
(1) Installation
This server can be mounted to a rack made by NEC or other companies. Mount the server to a rack in the
following procedure.
Preparation
The left and right rails are fixed with tapes at factory to prevent them from falling during transportation.
Peel off tapes before mounting them on the rack.
If you install the mount kit to a circular hole type rack, replace the metal fittings of
the front side, and the metal fittings of the rear side of a mount kit. Refer to the
following figures.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
222
To Next Page
Loading...