NEC express5800 A2010b - Page 292

7. Using Remote Management
Chapter 3 Setup
④ UID (Unit ID) LED, UID button
Press this button to turn on or off the UID LED. UID LED blinks when IPMI command is received.
Color
Status
On (blue)
UID LED on the server is lit.
Off
UID LED on the server is unlit.
Blinking (blue)
UID LED on the server is blinking
⑤ STATUS LED
Shows status of STATUS LED on the server.
Color
Status
On (green)
System is operating normally.
Off
System power is off, POST is in progress, or an error was detected.
On (amber)
An error was detected.
Blinking (amber) A warning event was detected.
⑥ Number of logged in users
Shows the number of users currently logged in web console.
Icon
Status
Only one user is logged in.
Several users (including oneself) are logged in simultaneously.
⑦ Remote media connection status
Shows connection status of remote media.
Icon
Status
Remote FD is being connected.
Remote USB memory is being connected.
Remote CD/DVD is being connected.
⑧ Remote KVM/Media Start button
Press this button to start Remote KVM/Media.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
292