7. Using Remote Management
(1)
SEL
Displays System Event Log.
Buttons
① Display the latest information.
② Clear SEL.
Press this button to clear SEL stored in master BMC. Pressing the [Yes] button on confirmation popup
message clears SEL. After the event logs are cleared, only one log that indicates that all logs have been
cleared is registered. However, some SELs that are registerd after pressing the [Yes] button also could be
shown at once.
Activity Logs are not cleared by this operation.
③ Save SEL in text format.
④ The following icons show the severity of SEL.
Critical
(Non-Recoverable)
Information event (e.g., OS-specific SEL)
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
301
To Next Page
Loading...