NEC express5800 A2010b - Page 335

7. Using Remote Management
Chapter 3 Setup
User List page
Item
Description
No.
Shows number assigned to the user.
User
Shows login user name.
The invalid user name is
grayed out.
Privilege
Shows privilege.
Administrator
A user having administrator privilege who is allowed to perform
all operations.
Operator
A user who is allowed to operate the server. Session
management, license registration,
Remote KVM/Media,
configuration, and update are not allowed.
User
General user who can view IPMI information only.
Operation
Displays buttons to access user account.
Only the user having administrator privilege can use these buttons.
SSH
Shows whether SSH public key is registered or not by an icon.
Edit page
Pressing the [Edit] button opens the User Edit page. Setting items are shown below.
Item name
Setup value
User
Select Enable/Disable for the user.
User Name
Specify user name. Up to 15 characters can be accepted. (*1)
Password
Set password. Up to 19 characters can be accepted. (*2)
Confirm Password
Enter the same character string as password. (*2)
Privilege
Specify privilege of the user.
Administrator, Operator, or User can be selected.
Public Key for SSH
Select whether SSH public key is registered or not.
[Register] must be selected to perform public key authentication in SSH.
Registration of
Public Key for SSH
To register SSH public key, select a file and register the key. This item is
indispensable if you select [Register].
(*1) 1-byte alphanumeric, [-], and [_] can be accepted. Note that [-] cannot be placed at the top of user
name.



Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
335