NEC express5800 A2010b - Page 398

7. Using Remote Management
Chapter 3 Setup
Tips
The indication on this page differs depending on server model. If you are using Internet
Explorer 8 as a browser and copy & paste th
e text on the page, information of other models
may be displayed.
Mode Setting/Core Disable page
Use this page to select a mode and specify the number of cores to be disabled. Administrator privilege is
required to use this feature.
Item name
Current value
Default setting
Spare Core Optimization Mode
Specify the mode to assign cores.
Centralize: Cores are enabled on each
socket intensively. Accordingly, the number
of enabled cores may deviated in each core.
Decentralize: Enabled cores are distributed
to each socket.
Decentralize
Spare Core Configuration Mode
Specify the configuration mode for spare
core.
Dynamic: Cores are enabled (codeword is
set) while the OS is running.
Static: Cores are enabled while the
OS is not
running.
Static
Disable CPU Cores Specify the number of cores to be disabled.
Allowable value: 0 to maximum number of
cores
The maximum number of cores depends on
server model.
0
Core Assign Mode
Specify whether cores are assigned equally
to each CPU sockets.
Type1: Does not assign equally.
Type2: Assigns equally.
Type1
Important
• With A2010b and A2020b models, [Disable CPU Cores], [Spare Core Optimization
Mode], and [Spare Core Configuration Mode] in Mode Setting/Core Disable page
are not supported.
• With A1040b model, [Spare Core Configuration Mode]
in Mode Setting/Core
Disable page is not supported.



Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
398