8. SMASH-CLP
• amber on
STATUS LED lights in amber.
• amber blink
STATUS LED is blinking in amber.
The state of the STATUS LED and the meaning are different according to the system. See
Chapter 1 (5.6.3 SYSTEM STATUS LED) for details.
(3)
UID LED State acquisition
Enter the following command at the command prompt:
lampstate -uidlamp
One of the following responses is returned according to actual display state of the UID LED.
• off
UID LED is turned off.
• on
UID LED is turned on (lights).
• blink
UID LED is blinking (flashing).
If the server has no UID LED, the "UID Switch Control" feature works only to the virtual UID
LED of the Server Panel. See Chapter 1 (5.6.2 UID LED) for details of UID LED.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
434
To Next Page
Loading...